With a few simple projects, you can boost your home’s energy efficiency, cut down on your utility bills and make a positive impact on the planet.
From sealing drafty windows to installing a smart thermostat, our easy-to-follow videos and tips will have you tackling home upgrades like a pro. Plus, you’ll save money that you can spend on the things that matter most—like family, friends and fun.
And don’t forget to visit our Online Marketplace for great deals on all the supplies you’ll need to get started.
Seal in comfort and save like a pro
- Step 1 – Clean the window to prepare for installation. –
- Step 2 – Apply the double-stick tape around the edges. –
- Step 3 – Attach the film to one side, pulling it tight while leaving 4–6 inches of extra material. –
- Step 4 – Use a hair dryer to shrink the film, creating a snug fit. It’s that simple!
Want some pro advice?
Keep the air outside from coming inside
- Step 1 – Tools: You’ll need two tubes of caulk, a tube gun, a utility knife, a glove, sandpaper and a towel. –
- Step 2 – Prep: Wipe down the window surface, remove the old caulk with your knife and sand off any leftover material. –
- Step 3 – Application: Cut the tip off the caulk tube, leaving a small hole. Apply continuous pressure along the window seam and then smooth the bead with your glove.
Here’s a pro tip
Let your thermostat do the work
Ready to install your new smart thermostat? Most brands share the same basic setup, but you may want to check your model’s instructions or find a contractor. –
- Step 1 – Turn off the power at the circuit breaker, and if in doubt, turn off all the power. If you feel uncomfortable working with electricity, hire a contractor to install your thermostat. –
- Step 2 – Take the faceplate off and snap a photo of the wires to help you reconnect them later. –
- Step 3 – Remove the old baseplate and install the new one. Use a level to make sure it’s even. –
- Step 4 – Reference the instructions from the manufacturer and attach the wires by matching corresponding colors or labels. –
- Step 5 – Attach the smart thermostat, then flip breakers back on to make sure the thermostat has power. –
- Step 6 – Connect your smart thermostat to your Wi-Fi network and set the temperature by following the manufacturer instructions for your model.
Save more with pro-level DIY energy tips
Tip #1
- Look for Brightness. The higher the number of lumens, the brighter the bulb. Brightness used to be measured in watts, but it’s now measured in lumens. –
- Check the Estimated Yearly Energy Cost, allowing you to compare savings between different bulbs. –
- Look under Life to see how long the bulb might last before it needs to be replaced. –
- Check Light Appearance. A low number means the light is warm, while a higher number means it is cooler. –
- Finally, check Energy Used to find out how many watts the bulb uses.
Tip #2
Electronics that draw power even when shut off can add up to about $200 in annual energy costs for the average home. Save energy and money with an advanced power strip—all you do is plug it in!
- Use a power strip for electronics such as your computer, tablet, gaming system and cellphone. –
- Plug in your TV, cable box, DVD player and sound system to a power strip.
Want a quick reference to help you with the DIY projects shown above? Download our step-by-step guide.
Got a task you don’t want to tackle yourself? We know some real pros who can help you out. Find a contractor near you.
0 Comments